You may wish to secure your safe to a fixed part of the house (i.e.
stone wall or wooden beam).
This can be achieved by using 2 of the 4 rawl bolts supplied in the
back of the safe or using the 4 rawlbolts in the base of the safe.
Use the holes in the safe to mark where you need to drill. Loosely
attach the rawlbolts onto the safe with the nuts and washers
provided. Hold the safe over the drilled holes and locate the
rawlbolts into these holes (Dia 6). Tighten the nuts from the inside
of the safe to secure firmly.
Note :
The rawlbolts are packed inside the safe
Dia.6
Back of safe
Wall
Nut & Washer
on the inside of
the safe
Dia.7
-4-
