While the door is open familiarise yourself with the door opening procedure, and leave the door open
until you are satisfied that you fully understand the opening and closing method. You can re-set the PIN
at any time by following the above procedure.
OPENING THE DOOR USING YOUR PIN NUMBER
(
personal identification number
)
Press “START”
•
Enter your PIN number, (either the user or master PIN).
•
Press “START”
•
“OPEN” will be displayed on the LCD screen, three beeps will be heard and the lock will disengage.
•
You now have 5 seconds to open the door before it will lock again.
•
Open the safe door by turning the knob clockwise and pulling it open.
•
Note: If the safe door is not opened for more than 5 seconds after the correct PIN has been entered it will
automatically re-lock.
Low Battery Power
If when pressing the “START” OR Reset button the “Lo-BAt” is shown up on the LCD screen,
please change your batteries immediately.
If the wrong PIN is entered the display will show “Error” and the safe will not open.
If the incorrect PIN is entered 4 times consecutively, the display will show “Error” and bleep
every second until the door is opened with the override key and the red reset button pressed.
The alarm will stop. Alternatively the alarm will stop after 3 minutes automatically.
OPENING THE SAFE USING THE OVERRIDE KEY
Use the Manual override key to open the safe.
Remove the plastic key lock cover (dia.1)
•
Insert the override key; turn it anti-clockwise, at the same time turn the locking knob clockwise and pull
•
open the safe.
BATTERY REPLACEMENT
1. The digital safe uses four ‘AA’ type batteries (supplied).
Remove the battery cover on the rear of the door (dia.4). Push the catch in and pull out the cover.
•
Install the 4x ‘AA’ batteries supplied. Ensure correct polarity.
•
Replace the battery cover.
•
“o”s will be displayed on the LCD followed by “good”.
•
Keep the safe door open until you have set the PIN code.
•
The battery life is approximately one year.
Make a note of the battery replacement date; they
should last approximately one year. However, we
recommend checking the batteries every 6 months
just to make sure. If power is removed from the safe
the set PIN code will be only remain in its memory for
approximately 4 hrs then it will need re-setting.
SECURING YOUR SAFE
ADVICE: WE STRONGLY RECOMMEND THAT YOU SECURE
YOUR SAFE TO A WALL OR FLOOR FOR SECURITY
REASONS.
Dia.4
Dia.5
-3-
