PROGRAMMING YOUR USER PIN NUMBER
(
personal identification number
)
DEFAULT FACTORY USER PIN: 159159
Each time a button is pressed, a beep will be heard. This is a safety feature so that you will know when
the safe is being accessed and cannot be switched off.
Keep PIN Codes in a safe place.
Do not use personal information like birthdays, telephone numbers etc.
Write down your PIN number so you do not forget it. (any
•
combination of 6 numbers)
With the door open, remove the security cap by unscrewing it,
•
(dia.2).
Press “START” button
•
The LCD screen displays “------”
•
You now have 20 seconds to enter your 6 digit PIN number.
•
Depress the red reset button located at the back of the door.
•
“In” will be displayed on the LCD screen followed by the PIN
•
number you have entered and two beeps will be heard
You PIN has now been set.
•
Screw the security cap back onto the red reset button. Ensure you do this for security reasons.
•
While the door is open familiarise yourself with the door opening procedure, and leave the door open
until you are satisfied that you fully understand the opening and closing method. You can re-set the PIN
at any time by following the above procedure.
PROGRAMMING YOUR MASTER PIN NUMBER
(personal identification number)
DEFAULT FACTORY MASTER PIN: 159159
Each time a button is pressed, a beep will be heard. This is a safety feature so that you will know when
the safe is being accessed and cannot be switched off.
Keep PIN Codes in a safe place.
Do not use personal information like birthdays, telephone numbers etc.
• Write down your PIN number so you do not forget it.
(any combination of 6 numbers)
With the door open, remove the security cap by unscrewing it,
•
(dia.3).
Depress the red reset button located at the back of the door.
•
Press “START” button
•
The LCD screen displays “------”
•
You now have 20 seconds to enter your 6 digit PIN number.
•
“In” will be displayed on the LCD screen followed by the PIN
•
number you have entered and two beeps will be heard
You PIN has now been set.
•
Screw the security cap back onto the red reset button. Ensure
•
you do this for security reasons.
Dia.2
Security cap
covering reset
button
Dia.3
Security cap
covering reset
button
-2-
