4
Customer Helpline
01904 727508
www.coreservice.co.uk
Safety Information
Important - Please read these instructions fully before starting assembly
8. Head protection. Always use safety glasses and gloves. Use a face or dust
mask whenever the operations may produce dust or flying particles. Wear
ear protection whenever the sound level seems uncomfortable.
9. Do not overreach. Keep proper footing and balance at all times.
10. Stay alert, watch what you are doing. Use common sense when operating
the appliance. Do not operate the tool when you are tired.
11. Grip the tool securely. Operator should one hand on the main handle, the
other on the front handle. Keep finger off trigger until ready to use.
12.
Remove adjusting keys and wrenches. Always check that adjusting keys and
wrenches are removed from the tool before operating the tool.
13. Risk of cut. Do not touch or try to stop the cutting lines when they are
moving.
14. Disconnect the plug. Disconnect plug from the tool when not in use or when
servicing or cleaning.
15. Check for damaged parts. Before further use, carefully check the tool for
damage.
Check for alignment of moving parts, binding of moving parts, breakage of
parts, mounting and any other condition that may affect its operation. Do not
use the tool if any parts are damaged or defective. Have any damaged or
defective parts repaired or replaced by an authorized service agent. Never
attempt any repairs yourself.
16. Avoid unintentional starting. Do not carry the tool without disconnect the plug
and be sure the tool is switched off.
17.
Use an extension cord suitable for outdoor use when operating a power tool
outdoors. Use a cord suitable for outdoor use reduces the risk of electric
shocks.
18. If operating a power tool in a damp location is unavoidable, use a residual
current device (RCD) protected supply. Use of an RCD reduces the risk of
electric shock.
19. Store idle tools. When not in use, tools should be stored in a dry, locked-up
place out of reach of children.
20. Maintain tools with care. Keep tools clean and in good condition for better
and safer performance. Follow the instructions for maintenance and
changing accessories. Keep handles and switches dry, clean and free from
oil and grease.
21. Have your tool repaired by an authorized service agent. This tool is
manufactured in accordance with the relevant safety regulations. To avoid
danger, electrical appliances must only be repaired by qualified technicians.
General Power Tool Safety Warnings
