11
Customer Helpline
01904 727508
www.coreservice.co.uk
Preparing to Operate the Grass Trimmer
Connection to the power supply
WARNING!
Read all of the instructions of thi s manual before attempting to connection the power
supply for your tool.
WARNING!
If the insulation on a power cable or extension lead is found to be cut or damaged, do
not touch it! Disconnect the power supply immediately and have the damaged cable replaced by
authorised service agent.
WARNING!
If operat ing the appliance in a damp locat on is unavoidab e,use a resi dual current
device(RCD) protected supply.Use of an RCD reduces the risk of electric shock.
WARNING!
Use only extension cords suitable for outdoor use,preferably with a h igh visibility
cable colour.Always unwind all extension cables fully,coiled cables can overheat and reduce the
efficiency of your product.
NOTE!
For extension cables up to 15metres, use a wire cross sect on of 1.5mm
2
. For extension
cables over 15 meters but less than 40 meters,use a wire cross section of 2.5 mm
2
.
WARNING!
This product is designed to operate on 230-240 VAC 50Hz. The voltage and current
must comply with the information on the ratings label!
NOTE!
This grass trimmer is fitted with a non-rewireable plug.If it is necessary to change the fuse
in the plug,the fuse cover becomes lost or damaged,the plug must not be used until a suitable
replacement is obtained.
WARNING!
A 13amp fuse must be fitted.
