Challenge ME1030M, Инструкция по эксплуатации

Страница: 12 / 19

6. Before starting the equipment
The lawn mower is delivered unassembled. The complete push handle and
the grass collector must be assembled before using the lawn mower. Follow
the instructions step-by-step and use the pictures provided as a visual guide
to easily assemble the machine.
6.1 Fitting the push handle (Fig. 3a to 3d)
Fit a bottom handle support (Fig. 3a / Item 5) into the opening provided for it
(Fig. 3a) and secure it as shown in Fig. 3b with a screw (Fig. 3b / Item 10).
Proceed in the same way on the other side. When you fit the top push handle
you can decide the height of the push handle by selecting the appropriate
fastening hole (Fig. 3c). Fasten the top push handle using either the holes L
for a low position or H for a high position. Screw the top push handle to the
bottom handle support as shown in Fig. 3d.
6.2 Fitting the grass box (Fig. 4a to 4f)
Fit the two halves of the grass box together (Fig. 4a / Item 7a). The two
halves are identical. Ensure that all the plastic lugs engage correctly (Fig. 4b).
Next push the grass box handle (Fig. 4c / Item 12) into the openings on the
grass box. Check that the handle is secure and correctly positioned as
shown in Fig. 4d.
Before you fit the grass bag you must ensure that the motor is switched off
and the blade is not rotating. The grass box must be attached to the two
hooks on the mower (Fig. 4e / Item A). To do this, open the grass deflector
with one hand (Fig. 4f / Item 6) and attach the grass box with the other hand
as shown in Fig. 4f.
The grass deflector is held against the grass box by a spring.
6.3 Setting the cutting heights
Important!
Adjust the cutting height only when the motor is switched off and the power
cable has been disconnected.
Before you begin to mow, check to ensure that the blade is not blunt and that
none of the fasteners are damaged. To prevent any imbalance, replace blunt