APR 2018
CMT-330TC Three-Knife Trimmer
3-11
3. Operator's Guide
Maximum Jog Pressure
– Sets the maximum
pressure that the trimmer will use for the left
hand side jogger. Press the button below the
slider to test this value on very thick books.
CAUTION
Caution: When testing the jog pressure, make
sure to place a book in the jogger area first!
Failure to do so may result in damage to the jog-
ger cylinder!
Enable Cut Cycle Button
– Pressing this button
allows the user to initiate a cut cycle by pressing
the green start button on either the front or rear
of the machine. This is helpful when adjusting
the cut depth.
Shipping Position Button
– Pressing this but-
ton allows the user to put the machine’s cutting
mechanism into shipping position by pressing
the green start button on either the front or rear
of the machine.
3.6.7 Accuracy Adjust
Figure 3-22. Accuracy Adjust
This tab is used to calibrate the trimmer’s dimen-
sional accuracy. This screen is not accessible
unless the code
6125
is entered into the Enable
Tabs Code input box on the Service Info tab.
Note: Settings on this screen must be set
correctly, or else damage to machine could
result! Use caution when editing!
To adjust the accuracy, follow the instructions
displayed on the screen.
Face Jog Comp Adjust
– This setting deter-
mines the position of the book during registration
with respect to the face jogger. This setting is
used to ensure that the face jogger makes
proper contact with each book. The higher the
number, the farther forward the book will be po-
sitioned.
Thickness Adj
– This button starts the calibra-
tion process for the automatic book thickness
sensor. To calibrate the sensor, follow the in-
structions on the screen.
3.7 Diagnostics
Figure 3-23. Diagnostics
The Diagnostics screen (Figure 3-23) is used by
technicians to perform a variety of diagnostics
and tests. The diagnostics screen also displays
the recent error messages which can be helpful
for troubleshooting purposes.
For a detailed description of the items on the Di-
agnostics screen and how to use them, as well
as a list of possible error codes, consult the
CMT-330TC Service Manual available at:
Содержание CMT-330TC
