CHAINTECH CT-6LIA, Руководство пользователя

Страница: 47 / 56

User's Manual
42
3-10 IDE HDD Auto Detection
This utility can automatically detect IDE hard disk type and parameters. The detection
process take about 5 seconds for each physical drive. After the utility detects the
disk drive, type Y and press [Enter] to automatically load the parameters in the Hard
Disk section of the Standard CMOS Setup menu. Otherwise, leave the option set
at N and press [Enter] or the [Esc] key to skip the detected drive. After detecting
your hard drive(s), return to the Standard CMOS menu to check your settings.
ROM PCI / ISA BIOS (2A69JC39)
CMOS SETUP UTILITY
AWARD SOFTWARE, INC.
HARD DISKS TYPE SIZE CYLS HEAD PRECOMP LANDZ SECTOR MODE
ESC: Skip
Primary Master :
Select Primary Master Option (N=Skip) : N
OPTIONS SIZE CYLS HEAD PRECOMP LANDZ SECTOR MODE
2 (Y) 547 530 32 0 1059 63 LBA
1 547 1060 16 65535 1059 63 NORMAL
3 547 530 32 65535 1059 63 LARGE
Note: Some OSes (like SCO-UNIX) must use "NORMAL" for installation
3-11 Save and Exit Setup
If you select this and type Y (for yes) followed by the [Enter] key, the values
entered in the setup utilities will be recorded in the CMOS memory of the BIOS
chip.
3-12 Exit Without Saving
Selecting this option and pressing Y followed by the [Enter] key lets you exit the
Setup program without recording any new values or changing old ones.
Figure 3-12 IDE HDD Auto Detection Screen