CHAINTECH CT-6LIA, Руководство пользователя

Страница: 30 / 56

Award BIOS Setup Program
25
Typematic Rate (Chars/Sec)
The typematic rate sets the rate at which characters on the screen repeat when
a key is pressed and held down.
Typematic Delay (Msec)
The typematic delay sets how long after you press a key that a character begins
repeating.
F. Security Option
The Supervisor and/or User Password functions shown in Figure 3-1 must be
set to take advantage of this function. See Section 3-9 for password setting
information. When the Security Option is set to System, a password must be
entered to boot the system or enter the BIOS setup program. When the Security
Option is set to Setup, a password is required to enter the BIOS setup program.
G. PCI/VGA Palette Snoop
Some non-standard VGA cards or MPEG video cards may not show colors
properly. Setting this function to Enabled can correct this problem.
H. OS Select (For DRAM > 64MB)
If your system's DRAM is larger than 64MB and you are running OS/2, select
OS/2 as the item value. Otherwise, set the item value to Non-OS/2 for all other
operating systems.
I. HDD S.M.A.R.T. Capability
S.M.A.R.T. or Self-Monitoring, Analysis, and Reporting Technology enables a
drive's internal status to be monitored through diagnostic commands. Both your
hard drive must support this capability and this function must be enabled in order
to take advantage of this function. See your hard drive literature for more
information.
J. Shadow Memory
Software such as system BIOS, video BIOS, SCSI BIOS, etc that resides in ROM
(Read Only Memory) chips is called firmware. Shadowing of firmware occurs
when BIOS is copied to RAM address C0000h through DFFFFh. Video BIOS
loads into the C0000-C7FFF memory area when video shadowing is enabled.
If an expansion peripheral in your system contains ROM-based firmware, you
need to know the address range the ROM occupies to shadow it into the correct
area of RAM.