CHAINTECH 7NJL3, Руководство пользователя

Страница: 33 / 55

Chapter 3
Video Off Method
This function serves as both a screen saver and power saver for monitors. See
the next function, Video Off After, for setting the video timer.
Blank Screen - BIOS will only blank the monitor's screen. The electricity
saved in this mode is negligible and this function is only used as a screen saver
to prevent screen damage while the screen is on but not in use.
V/H SYNC+Blank - The system turns off the vertical and horizontal
synchronization ports, writes blanks to the VGA buffer and the monitor's
electron gun turns off. This function requires a monitor with Green features in
order to take advantage of the power saving function. If you enable this
function and do not have a Green monitor, the result will be the same as if you
had selected Blank. This function serves as both a screen saver and a power
saver.
DPMS Support - Select this option if your video card supports the Display
Power Management Signaling (DPMS) standard (i.e., you have a monitor that
supports Green features). Use software supplied by your video subsystem to
set video power management options.
HDD Power Down
Shuts down any IDE hard disk drives in the system after a period of inactivity
as set in this user configurable field. This feature does not affect SCSI hard
drives.
HDD Down In Suspend
In Suspend any IDE hard disk drives in the system after a period of inactivity as
set in this user configurable field. This feature does not affect SCSI hard drives.
Soft-Off by PBTN
When set to Delay 4 Sec., this function allows the power button to put the
system in Suspend, a power saving mode. When set to Instant-Off the Soft-Off
by PWR-BTN function is disabled and the computer turns completely off when
the power button is pressed.
PWRON After PWR-Fail
This allows you to set whether you want your system to reboot after the power
has been interrupted. [ Off ] leaves your system off and [ On ] reboots your system.
[ Former-Sts ] sets your system back to the state it is before the power
interruption.
Configuration option: [ Off ], [ On ], [ Former-Sts ]
Wake up Events
Power On by PME/OnBoard LAN
When enabled, the nVidia LAN, which is on Board, will be able to receive a
signal and wake up the system from soft off and suspend mode. You should
connect the LAN to the RJ45 port and turn on the resume event in suspend
29