CHAINTECH 7NJL3, Руководство пользователя

Страница: 31 / 55

Chapter 3
unless you are certain your hardware and software support one of the other
available modes.
ECP Mode Use DMA
This item automatically specifies a DMA channel 1 or 3 for the parallel port
when it is set to [ ECP ] or [ ECP+EPP ] mode.
Game Port Address
This item disables or assigns the address of the Game port. Available options
are [ 201 ] and [ 209 ].
Midi Port Address
This item disables or assigns the address of the Midi port. Available options
are [ 300 ] and [ 330 ].
Midi Port IRQ
This item specifies an IRQ for the Midi port.
Init Display First
This function allows user to choose between [ Onboard / AGP ] or [ PCI Slot ]
to initialize Display first.
OnChip USB
Enable the on-board Universal Serial Bus (USB V1.1 or V2.0) controller if you
want to connect a USB device to your system. Note that if this setting is disabled,
you can still temporarily use a USB keyboard during boot up so that you can
enter BIOS and enable this setting. If you pass the boot up stage without enabling
this function, your PS/2 keyboard will no longer work.
Available options are [ Disabled ], [ V1.1+V2.0 ], and [ V1.1 ].
USB Keyboard Support
Select Enabled if your system has a USB keyboard installed on the system
board. If your system has no USB keyboard, select Disabled in this field.
27