background image

3.  Safety Notes and Maintenance procedures 

 

 

 

 

 

 

This appliance is designed for outdoor use only, as per SANS 1539 

 

DO NOT touch the Top Grids, Rock, Bottom Grids or Drip Tray whilst the 

Sizzler  Gas  Braai  is  in  use

. These components can reach extremely high 

temperatures and touching them could result in serious injury. 

 

The components in the Sizzler Gas Braai are designed to last a minimum of 3 

years  under  normal  (non-commercial)  use,  and  need  to  be  checked  before 

each usage for wear of the components. 

 

It is suggested that a qualified Gas technician check the appliance annually for 

damages  that  may  result  in  the  improper  working  of  the  unit.  

(Please call our Head Office for your closest dealer or qualified gas technician) 

 

Under  no  circumstance  must  the  Regulator  or  Gas  Hose  be  tampered 

with, adjusted or reset by an unqualified person. 

This could result in the 

incorrect gas pressure of the unit(2.8kPa), leading to improper burning of the 

Sizzler gas braai, which could cause premature component failure and/or seri-

ous injury.

 

 

If an aftermarket LPG regulator is Installed, a suitable LPG regulator that com-

plies with the requirements of SANS 1237 must be installed.

 

 

Only use the stipulated amount of rock (1 bag per burner) on each rock 

tray. 

Do  not  attempt  to  overload  the  rock  trays  with  extra  rock,  as  this 

may  result  in  over  heating  of  the  burner  body,  leading  to  component  failure, 

and/or serious injury. 

 

In  the  event  of    a  “Burn-Back”  or  Gas  Leak,  you  should  turn  off  the  shut  off 

valve at the Gas Bottle immediately and consult a qualified Gas technician to 

assess the problem before continuing to use the appliance.

 

 

 

WARNING: If you suspect that there is a gas leak, DO NOT use 

the appliance until it has been checked and/or serviced by a 

Qualified Gas Service Technician 

Содержание SMB-310





















Отзывы: