CHAD-O-CHEF SGG320, Инструкция по эксплуатации

Страница: 7 / 12

4
LIGHTING THE APPLIANCE
WARNING
: If at anytime during the igniting process, or during use, you smell gas,
immediately turn off the gas supply to the appliance at both the Burner Control
Knobs and the shut off valve and do not use the appliance until it has been
checked for gas leaks. It is preferable that this be done by a qualified gas service
technician
1. Open all gas supply valves.
2. Push and turn far LH control knob counter-clockwise to “ON” position
3. Push ignitor button repeatedly.
4. Check that pilot burner ignites.
5. If not alight, turn gas off and wait for 30sec.
6. Turn far LH control knob to High.
7. Turn on knobs 2, 3/4/5/6 on High in sequence.
8. After use, turn off all control knobs and valve on gas bottle, including
shut-off valve (if installed).
• It may be necessary to push the ignitor button several times especially after
changing a cylinder.
• Should your braai not light after repeated attempts, have the unit examined
by a qualified technician.
Gas inlet
Ignitor
LH Contol
Knob