1
TECHNICAL DATA - SPECIFICATIONS
Thank you for purchasing your new CHAD-O-CHEF Gas Grill manufactured to
the highest standards and tested for compliance with South African Standards.
This appliance is designed to give users years of trouble free and efficient
service. Please read the following instructions carefully. Please note that this
appliance must be installed by a registered gas fitter as indicated below. The
manufacturer and /or its agents and distributors will not be held responsible
for injuries or damages caused by faulty or incorrect installation or use of the
appliance.
SPECIFICATIONS
LP GAS
NAT GAS
Model
SGG330/320/420/520/
620
SGG330-N/320-N/420-N
/520-N/620-N
Gas Type
LP GAS
Natural Gas
Operating Pressure
2.8 kPa
2.1 kPa
Max Consumption
0.28 KG/hr per burner
3.0 m
3
/hr per burner
Max kW Input
3.9 kW/h per burner
3.5 kW/h per burner
Important Information For the USER:
This appliance may only be installed by a registered Gas installer.
All registered
installers are issued with a card carrying their registration number. Ask to be
shown the card before allowing the installation work to commence and make
a note of the Installer QCC number. Upon completion of the installation, the
installer is required to explain the operational details of the appliance together
with the safety instructions. You will be asked to sign acceptance of the
installation and be provided with a completion certificate. You should only sign
for acceptance of the installation when the installation is completed to your
satisfaction. This unit is designed to be used with gas only. It is
not
suitable for
wood or charcoal fires, unless used with the Sizzler-Hybrid Attachment.
Note that if the guarantee card is not signed by yourself and the installer and
returned to the manufacturer, the product guarantee is invalid.
Important information for the INSTALLER:
This appliance may only be installed by a gas installer registered by the Liquefied
Petroleum Gas Association of Southern Africa. The appliance must be installed
in accordance with the requirements of SANS 10087-1 and any fire department
regulations and/or local bylaws applicable to the area. If in doubt check with
the relevant authority before undertaking the installation. Upon completion of
the installation you are required to fully explain and demonstrate to the user
the operational details and safety practices applicable to the appliance and the
installation.
The appliance has been designed specifically for use with LP Gas as supplied
and may not be converted. Conversions must be done by the manufactures.
Содержание SGG320
Страница 10: ...7...
