background image

5

TURNING OFF THE APPLIANCE

VENTILATION REQUIREMENTS

CARE & MAINTENANCE

USING THE APPLIANCE

To turn off the appliance turn all the Control knobs in a clockwise direction to the 
off position. Then close the master shut-off or isolation valve. This will shut off all 
gas supply to the appliance and the pilot flame will go out. 

Do not attempt to 

blow the Pilot Flame out.

This appliance is designed specifically to be installed in an open area providing 
that care is taken that the base or foundation upon which the unit is installed 
is of a fire resistant material. An Extractor Hood is necessary for inside use.  
Ensure that suitable ventillation holes in the massionary housing is present - see 
installation instructions.

 

besides the normal cleaning required after use there are no user service 
points on this appliance.

 

It is recommended that the appliance be serviced by a qualified technician 
on an annual basis.

 

before undertaking any cleaning or maintenance work on the appliance, 
make sure that it is not hot and that the shut-off valve is turned off.

 

CHAD-O-CHEF appliances are made from stainless steel. Whilst this is a 
very durable material and is widely used for appliance manufacture, its 
surface can be damaged by misuse or the application of unsuitable cleaning 
materials or methods.

 

To clean the external surfaces of the appliance, use a specialized stainless 
steel cleaner supplied by Chad-O-Chef, or a non abrasive detergent such as 
washing up liquid or cream based Handy Andy to remove accumulated fat 
or grease.  Never use oven cleaner or any caustic cleaner, abrasive cleaning 
solvents, scouring powders, metal polish, silverware cleaners or any type of 
scouring pads as this will permanently damage the surface.

 

When in use make sure that there are no flammable materials close to the 
front sides or rear of the appliance. 

 

After starting the appliance, leave all burners on 

High

 for 10 -15 mins. prior 

to grilling. After that time adjust the heat to the desired level by turning the 
control knobs as required.

 

When finished grilling, leave the appliance on high for a further 5 - 10 mins. 
This will remove excess fat from the rocks.

Содержание HGG 330













Отзывы: