CG Emotron OSTO 100, Инструкция по эксплуатации

Страница: 13 / 112

CG Drives & Automation 01-7513-11r0 Safety information 13
2.1 Notes on safety and symbols used
2.2 Technical information
The technical documentation is a part of the product / machine. Due to that
the technical documentation contains important information and it shall be
kept near the machine at all times until the machine is finally disposed of. In
case the machine is sold, disposed or rented out, secure that the applicable
technical documentation follows the machinery.
2.3 Risk analysis
This documentation can only indicate the necessity of risk analysis. Users of
integrated safety systems must familiarize themselves with the relevant standards
and legislation. Before a machine can be marketed, machine manufacturers
must perform a risk analysis in accordance with the Machinery Directive so as
to determine the risk associated with the use of the machine.
WARNING!
• Failure to follow these instructions can result in serious injury to the
operator and/or machinery.
• The Safe Torque Off only guarantees a torque less motor, i.e. hazardous
voltages can still be present at the output of the drive controller while
STO is active. The STO safety function does NOT disconnect the voltage
to the mains or auxiliary circuits of the drive.
•
The Emotron OSTO_100 option is NOT designed for ‘Emergency Off’
function (another aspect of functional safety which also includes reali-
zation of no voltage present after activation, described in DIN EN
60204-1:2006).
NOTE: If the Emotron OSTO_100 option is mounted into an Emotron AC drive
where the STO feature shall not be utilized, then both input channels
STO1
and STO2 must be connected to 24Vdc SELV/PELV input to allow motor
operation.