CLEANING & STORAGE
105
Washing Vehicle
•
Rinse with cold water to remove any loose dirt.
•
Mix a mild detergent specifi c for motorcycles or automobiles with water in bucket. Use a soft cloth
or sponge to wash your motorcycle. If necessary, use a mild degreaser to remove any oil or grease
build-up. Start at the top of the motorcycle and wash bottom parts last.
•
After washing, rinse your motorcycle with clean water to remove any residue (residue from the
detergent can damage the components of your motorcycle).
•
Dry o
ff
your motorcycle with a soft cloth to avoid scratches.
•
Start the engine and allow it idle for several minutes. The heat from the engine will help dry o
ff
the
vehicle in moist areas.
•
Carefully ride the motorcycle at a low speed and apply the brake several times. This will help to dry
the brakes and restores their normal operating performance.
•
Lubricate the drive chain to prevent rusting.
NOTE:
When riding in areas where the roads are salted or near the ocean, clean the motorcycle after your ride
with cold water immediately. Do not use warm water to wash your vehicle as it accelerates the chemical
reaction of the salt. After drying the vehicle, applying an anti-corrosion spray to all metal or chrome
surfaces will help prevent corrosion. In the case of riding during a rainy day or just washing the motorcycle,
condensation may form on the inside of the headlight lens. If this happens, start the engine and turn on the
headlight to remove the moisture.
