background image

*CET is a trademark of CET F

ire Pumps Mfg Ltd

.

75 Hector St., P.O. Box 90, Pierreville (Québec) Canada  J0G 1J0      Telephone: 1-800-567-2719      Fax: 1-800-434-2613      

www.fire-pump.com

ACCEPT ONLY THE BEST

A   C E N T U R Y   O F   E N G I N E E R I N G   F O R   T H E   B R AV E S T

SM-PFP-21hpDSL-MR

WARRANTY

*CET is a trademark of CET F

ire Pumps Mfg Ltd

.

75 Hector St., P.O. Box 90, Pierreville (Québec) Canada  J0G 1J0      Telephone: 1-800-567-2719      Fax: 1-800-434-2613      

www.fire-pump.com

ACCEPT ONLY THE BEST

A   C E N T U R Y   O F   E N G I N E E R I N G   F O R   T H E   B R AV E S T

REGISTRATION

TO BE RETURNED TO THE MANUFACTURER — FAX: 1-800-434-2613

 

Fire Department of :

 

Address :

 

Purchasing date :

 

Serial Number :

 

Dealer’s Name :

SEND TO :

C.E.T. FIRE PUMPS MFG

75 Hector St. P.O. Box 90, Pierreville, Qc. J0G 1J0 CANADA

CET warrants to the original purchaser that CET will, at its election, either replace or repair any part of the new equipment sold to the 
purchaser hereunder which has been given no abnormal use; and which has received proper maintenance; and which is determined 
by CET to be defective in material or workmanship; and which has, within two (2) years after delivery to the purchaser be returned 
at the purchaser’s expense, with transportation charges prepaid, to CET factory OR which has, within two (2) years after delivery  
to the purchaser, been pre-approved by CET for a third-party to perform the work. All problems shall be reported to CET in writing 
and damaged parts shall be returned to CET.

Exclusions from warranty

1. CET incurs no liability under this warranty or otherwise for parts, accessories or components not manufactured by it, but purchased 
for assembly into the equipment, but CET will assign to the Purchaser whatever warranty rights are extended by the supplier of such 
part, accessory or component
2. CET incurs no liability under this warranty or otherwise, for equipment which has been abused, altered or improperly maintained, 
or for equipment which has been returned for inspection or repair more than ten (10) days after defect complained of has been or 
should have been discovered by the Purchaser, or Equipment which is operated after the defect has been discovered.
3. CET incurs no liability for alteration or repairs unless the Purchaser first receives CET / written consent or approval. CET will not be 
responsible for work or repairs made or done by others.
4. CET incurs no liability for design alterations, parts, accessories or components which are not standard but are specified by the 
 Purchaser for incorporation into the equipment.

INTERPRETATION

CET shall not be liable for transportation charges either in shipment to or by it and shall not be liable for loss of use, or  consequential 
damage of any kind in connection with the sales, alteration, repair or replacement of any equipment or part thereof. Liability  under 
this warranty is limited to replacement or repair and in any event shall not exceed the purchase price paid. This warranty is not 
 transferable by the Purchaser. CET reserves the right to make changes in design or add any improvements to the Equipment at any 
time without incurring any obligation to install or modify same on other equipment previously supplied. 

There are no other warranties, conditions or representations, expressed or implied, except the above.

Содержание SM-PFP-21hpDSL-MR

Страница 1: ... single stage centrifugal pump Pump body made from resistant aluminum alloy Bronze impellers Steel pump shaft Mechanical shaft seal Stainless steel pump shaft Exhaust priming system guaranteed up to 15 4 6 meter lift One 1 1 2 38 mm delivery outlet One 2 1 2 65 mm suction inlet Dimensions Length 31 1 2 800 mm Width 26 660 mm Height 31 1 2 800 mm Weight 282 lbs 128 kg Two years warranty CONTROL PAN...

Страница 2: ...d Use your pump with less than 12 in of water below the inlet of the suction hose Allow your pump to run without surveillance Run the pump with the discharge valve closed for more than 1 minute STARTING PROCEDURE Place your pump on a hard stable surface within 15 from horizontal Check the oil Check the fuel tank level Connect your suction hose Make sure that there is a rubber seal on the adapter a...

Страница 3: ...rnals and replace hose connection caps Taking care of the pump will help prevent the pump from seizing up TROUBLESHOOTING Before calling us try the following if your pump does not operate properly If the venturi does not work properly Check the casing drain valve it should be closed Check any air leakage from suction hose If the engine seems to speed up and down lost of suction Make sure the sucti...

Страница 4: ...therwise for parts accessories or components not manufactured by it but purchased for assembly into the equipment but CET will assign to the Purchaser whatever warranty rights are extended by the supplier of such part accessory or component 2 CET incurs no liability under this warranty or otherwise for equipment which has been abused altered or improperly maintained or for equipment which has been...

Отзывы: