15
CET Electric Technology
In this example,
P1
of the PMC-1302 ESG is used, and
Site 1
has been configured with the following
parameters:
1.
Drive Type = MODBUS Protocol Master Site Driver,
2.
Polling Mode = Serial
3.
Port Type = Ethernet
4.
IP = 192.168.0.127
5.
Port = 20001 (for P2 of PMC-1302ESG)
Figure 5-6 Site Node Properties
Select
PMC-660
on the right-hand pane under the
Device Name
column and then click the
Properties
icon on the Tool Bar to bring up the
Device Properties
dialog box. Change
Device Type
to PMC-660,
Comm ID
to 100 and then click
OK
to save and exit the dialog box.
Figure 5-7 Device Node Properties
