5 Mechanical cylinder for the motor cylinder
5.1 Before ordering: Check cylinder length
Before a CESeasy motor cylinder is ordered, the length of the mechanical cylinder has to be
checked.
Tools required:
Folding rule or calliper gauge
How to proceed:
1. Determine the dimensions for the outside (S) and the
inside (K) of the cylinder.
Outside (S): Measure from the middle of the
cylinder fixing screw (3) to the end of the outside
fitting (1).
Inside (S): Measure from the middle of the cylinder
fixing screw (3) to the end of the inside fitting (2).
2. Indicate the exact dimensions for the exterior and the
interior together with your order.
From the measurements indicated, CES determines the
mechanical cylinder which matches your motor cylinder.
You will receive the motor cylinder with a pre-assembled
mechanical cylinder.
To maintain the break-in resistance of a cylinder, it
must never project more then 3 mm
beyond the surface of the handle set
. Make sure to use the correct cylinder length for
your handle set.
Page 10 of 53
CESeasy motor cylinder
5 Mechanical cylinder for the motor cylinder
