Assembly of the CESeasy motor cylinder
1. Remove all possibly existing batteries from the motor
cylinder.
2. Fix the existing handle set tightly enough to insert the
cylinder with ease in the door.
This step is necessary because after having attached
the motor cylinder, it will no longer be possible to
fasten the handle set.
3. Use the knob of the motor cylinder to turn the locking
cam far enough so as not to be an obstacle.
4. Push the cylinder into the door.
5. Tighten the cylinder fixing screw by hand. Do not use a
cordless screwdriver or similar tools.
If you fasten the cylinder fixing screw too strongly
the service life of the cylinder may be reduced!
Please also follow any assembly instructions given by
the manufacturer of the cylinder which is attached
to the motor cylinder.
6. Insert the batteries.
Please also refer to chapter
7. Check that the motor cylinder works correctly with
the
open door
:
- Turn the knob of the motor cylinder manually.
- Use a key for the mechanical cylinder.
CESeasy motor cylinder
Page 21 of 53
7 Assembly
