User Manual
©
2007 Cervis, Inc.
7
3.0 Base Unit Installation
CAUTION
Make sure the machine on which the base unit is to be attached is
disabled during installation.
Use the configuration diagrams supplied by Cervis to guide you in mounting the base
unit and connecting your wiring harness. Mounting of the base unit is left much to your
discretion with the following guidelines:
•
Before installing, make sure that the configuration diagrams supplied with the
system are available. Keep them so they are available at all times.
•
Make sure the wiring harness is at hand.
•
Always mount the receiver away from any intense radio or electric distur-
bance sources.
•
Make sure the mount is secure. Mount the unit where you have enough room
for your wiring harness connections.
Figure 7. Base Unit
Figure 8. Wiring Harness Cable
Mounting
Wiring Harness
Connector
