Bedienungsanleitung_MC_ALU_DE_EN_RevD.docx
Page 38 of 44
CertoClav Sterilizer GmbH
Peintner Strasse 10
A-4060 Leonding / Austria
www.certoclav.com
Program – recurring menu points in program menu:
•
Start
Starts the selected program
•
Info
Displays program steps
•
New program
Overwrites existing program to create a new, single step program
•
Back
Back to Programs Menu
Settings
•
Version
Version of firmware
•
Serial
Serial no. of the controller
•
Contrast
Display contrast. Selectable from 0-5
•
Factory reset
Resets controller to factory setting, including programs
•
Language
Language selector: German / English
•
Back
Back to Main Menu
Install a new program
To create a new program, you have to overwrite one of the pre-installed programs! The new specific
programs are shown in the menu with temperature and time (eg. 125deg16d18h08m). It is not possible to
give the new program a specific name.
•
Use the
Λ
/V – buttons to go to ‚Programs‘ and confirm with OK.
•
Choose with the
Λ
/V – buttons the program you want to overwrite and confirm with OK.
•
Choose with the
Λ
/V – buttons ‚New program‘ and confirm with OK.
