Bedienungsanleitung_MC_ALU_DE_EN_RevD.docx
Page 35 of 44
CertoClav Sterilizer GmbH
Peintner Strasse 10
A-4060 Leonding / Austria
www.certoclav.com
Replacement of the lid gasket
1.
Put out the old gasket and clean the groove.
2.
Oil the groove and the gasket with cooking oil
3.
Press gasket into groove ribbed side pointing downward (letters show to the middle of the lid) Do not
stretch the gasket when inserting, as it will get too long. Rather try to squeeze it a little bit, it will seal
better.
WE RECOMMEND THE
CERTOCLAV SERVICE SET ART. No.: 1250499.
It contains all spares which are under
wear and tear and must be replaced.
Spare parts
1250334
Manometer mit Schleppzeiger, komplett
Manometer with maximum indicator
1250320
Druckbegrenzungsventil
Pressure control valve
1250433
Ventildichtung
Gasket for valve
1250208
Abdampfhahn komplett mit Entlüftungsdüse
Steam release cock complete with venting
nozzle new
1250235
Deckelgriff mit Verriegelung, Schraube und Mutter Lid handle with lock, screw and nut
1250242
Abdampfventil
Steam release valve
1250237
Griff mit Schraube für Gerätekammer
Handle with screw for chamber
1251324
Sockel mit Steckdose
Base with socket
1250408
Dichtung für Sockel
Gasket for base
1260404
Deckeldichtung Silikon 24 cm
Lid gasket Silicon 24 cm
1250236
Deckelgriff mit Schraube und Mutter
Lid handle with screw + nut
1250451
Dichtung für Manometer und Abdampfhahn
Gasket for manometer and steam release cock
1250310
Sicherheitsventil mit 0-Ring
Safety valve with 0-ring
1300188A
Sensorkabel mit Einschraubfühler PT100
Heat probe cable with PT100
1250335
Bimetall-Sicherung
Bimetal fuse
1250356
Kabelsatz für Essential/MC
Cable set for Essential/MC
1300198
Geräteverbindungskabel zu Steuerung
Connection cable to controller
1300197
Netzkabel Steuerung
Main cable controller
1250380
Reinigungsnadel für Düse
Needle for cleaning venting nozzle
Art. no. 1250499 Service Set 1:
includes all gaskets and valves which are necessary for maintain the lid.
Gaskets should be replaced yearly.
Long time cycles cause a higher wear and tear
; replacements could be
necessary already after 6 months.
