The build process continued
STEP 47
Lay the foam base followed by the thin foam barrier.
Tape the joints for each layer.
STEP 48
Cut the foam 20mm clear and around the skimer face and
stick the black seal to skimmer face.
STEP 49
Cut the foam around the suction and return fittings.
Fit the black foam rubber seals aligning the holes.
STEP 50
Completed foam barrier
STEP 51
Lay the liner in the pool as close to the position that the liner
will be finally fitted. The liner is shaped to fit the pool, so make
sure it’s the correct way around. Take off your shoes when
working with the liner otherwise you will mark it.
STEP 52
Start placing the liner in the top groove of the plastic liner-
lock. Start from a corner and work your way round.
Tip:
Lay the liner out in the sun. A warm liner is easier to fit.
Align the holes
