LlFTING CAUTIONS
SPECIFICATIONS
2
1. Load must be supported by a set of jack stands rated at the proper capacity before
any work or inspection can be done on vehicle. Do not exceed the capacity or loss
of load may occur.
2. Always firmly apply parking brake.
3. Always place load at the centre of the jack's saddle for most stable support.
4. Jack is designed for side lifting use only.
5. This jack is designed for use on hard, level surfaces only. Use on uneven or unstable
surfaces could result in instability and possible failure to support load.
6. Place wheel chocks at the front and rear of the tires that will not be lifted before
proceeding.
WARNINGS
CAPACITY
LIFT RANGE
NET WEIGHT
1 1/2 ton
(1,360 kg)
4 1/8–15 1/8”
(10.5–38.5 cm)
7 lb
(3.2 kg)
1. BEFORE USING, READ, UNDERSTAND AND FOLLOW ALL INSTRUCTIONS BEFORE OPERATING THIS DEVICE.
2. DO NOT EXCEED RATED CAPACITY.
3. USE ONLY ON HARD, LEVEL SURFACES.
4. USE FOR EMERGENCY TIRE CHANGING ONLY.
5. NEVER GET BENEATH THE VEHICLE WHEN IT IS SUPPORTED BY THE JACK.
6. ACTIVATE THE HAZARD WARNING FLASHER, TURN OFF IGNITION, SET PARKING BRAKE, AND MOVE AUTOMATIC
SHIFT SELECTOR TO PARK POSITION. IN CASE OF A MANUAL TRANSMISSION, MOVE GEAR SELECTOR INTO
REVERSE POSITION. IN ADDITION, THE WHEEL DIAGONALLY OPPOSITE FROM THE WHEEL BEING LIFTED SHALL
BE CHOCKED IN BOTH DIRECTIONS.
7. LIFT ONLY ON AREAS OF THE VEHICLE AS SPECIFIED BY THE VEHICLE MANUFACTURER.
8. FOLLOW TIRE CHANGING PROCEDURE AS PER THE VEHICLE MANUFACTURER'S OWNER'S MANUAL.
9. NO ALTERATIONS SHALL BE MADE TO THIS PRODUCT.
