CertaUPS C400R-010-B, Руководство по установке

Страница: 48 / 54

44
10.2 RS-232 port
The RS-232 port is available for UPS monitoring, control, and firmware
updates. To establish communication between the UPS and a computer,
connect one end of the serial communication cable that comes with the UPS
to the RS-232 port on the UPS. Connect the other end of the serial cable to
the RS-232 port on a computer.
10.3 USB port
The UPS can communicate with a USB-compliant computer by using HID-
compatible power management software. To establish communication
between the UPS and a computer, connect the USB cable provided with the
UPS to the USB port on the UPS. Connect the other end of the USB cable to
the USB port on a computer.
10.4 Installing an optional Network Management Card (NMC)
Each UPS has one available intelligent slot which allows the installation of
the optional NMC, the NMC adds the additional functionality of TCP/IP
network connectivity via SNMP (simple network management protocol).
After you install an NMC Card, you can also connect an environmental
monitoring probe to the UPS.
Note:
You do not have to shutdown the UPS before you install a SNMP
card.
To install the Network Management Card, complete the following steps:
1.
Locate the UPS intelligent slot.
2. Remove the two screws that secure the intelligent slot cover to the UPS and
save the screws.
3. Insert the NMC card into the slot on the UPS.
4.
Secure the NMC to the UPS with both screws.
For more information about the NMC, see the NMC User's Guide.