Installation
Installing an Internal DAT24 Drive
16
Figure 4.
Mounting Holes for Internal DAT24 Drive in a 3.5-inch Configuration
(no mounting brackets)
Mounting the Drive in a 5.25-inch Drive Bay
To mount the drive in a 5.25-inch drive bay, use a drive with mounting brackets. The 5.25-inch drive
brackets have four screw holes on the bottom and six on each side (see Figure 5 on page 16).
Figure 5.
Mounting Holes for Internal DAT24 Drive in 5.25-inch Configuration
(with mounting brackets)
M3.0 X
4 DEEP MIN.
4 PLACES
94.0 mm
(3.70 in)
3.8 mm
(.15 in)
2 PLACES
31.0 mm
(1.22 in)
70.0 mm
(2.76 in)
8.0 mm
(.31 in)
2 PLACES
M3.0 X
4 DEEP MIN.
10 PLACES
5.0 mm
(.20 in)
2 PLACES
35.0 mm
(1.38 in)
2 PLACES
60.0 mm
(2.36 in)
2 PLACES
21.0 mm
(.83 in)
2 PLACES
30.0 mm
(1.18 in)
2 PLACES
Side View
Bottom View
104.1 mm
(4.10 in)
45.0 mm
(1.77 in)
6 mm
(.24 in)
2 PLACES
152 mm
(5.98 in)
101.6 mm
(4.00 in)
41.2 mm
(1.62 in)
28.3 mm
(1.11 in)
2 PLACES
41.3 mm
(1.63 in)
M3.0 X
4 DEEP MIN.
4 PLACES
139.7 mm
(5.50 in)
47.6 mm
(1.87 in)
79.4 mm
(3.13 in)
M3.0 X
4 DEEP MIN.
12 PLACES
79.4 mm
(3.13 in)
2 PLACES
47.6 mm
(1.87 in)
2 PLACES
148.5 mm
(5.84 in)
6 mm
(.24 in)
2 PLACES
180.6 mm
(7.11 in)
146 mm
(5.74 in)
41.2 mm
(1.62 in)
21.8 mm
(.86 in)
2 PLACES
31.5 mm
(1.24 in)
2 PLACES
41.3 mm
(1.63 in)
9.9 mm
(.39 in)
2 PLACES
Side View
Bottom View
