Continuing to use the product in anti-freeze mode even when temperatures have risen and
returned to normal may result in the engine failing to start properly or in the engine failing to
operate at its normal speed, and for this reason you should always be sure to return the unit to
normal operating mode if there is no danger of icing occurring.
When using the saw with the anti-freeze mode, frequently check the screen and keep it clean of saw dust.
Chain Brake
This machine is equipped with an automatic brake to stop saw chain rotation upon
occurrence of kickback while in saw cutting operation. The brake is automatically
operated by inertial force which acts on the weight fitted inside the front guard. This
brake can also be operated manually with the front guard turned down to the guide bar.
To release brake, pull up the front guard toward the front handle till a “click” sound is heard.
Be sure to confirm brake operation during the daily inspection.
If the engine is kept operating at high speed with the brake engaged, the clutch will heat up causing further
trouble. When the brake is operated during use, immediately release your fingers from the throttle lever to
keep the engine idling.
Stopping the Engine
1.
Release the throttle lever to allow the engine idling for a few minutes.
2.
Put the switch to the “O” (STOP) position. ( 1 = Switch)
Sawing
Before starting on your cutting job, read the “For Safe Operation” section. It is recommended to
first practice sawing on easy logs. This will also help you to get accustomed to your chainsaw.
•
Always follow the safety regulations. The chain saw must only be used for cutting wood. It is
forbidden to cut other types of material.
•
Vibrations and kickback vary with different materials. Do not use the chain saw as a lever for lifting,
moving or splitting objects . Do not lock it over fixed stands. It is forbidden to hitch tools or
accessories to the chainsaw that are not specified by Kogan.com.
•
It is not necessary to force the saw into the cut. Apply only light pressure while running the engine
at full throttle.
•
When the saw chain is caught in the cut, do not attempt to pull it out by force, but use a wedge or
a lever to open the way.
Guard Against Kickback
•
This saw is equipped with a chain brake that will stop the chain in the event
of kickback if operating properly. You must check the chain brake operation
before each usage by running the saw at full the throttle for 1-2 seconds and
pushing the front hand guard forward. The chain should stop immediately
with the engine at full speed. If the chain is slow to stop or does not stop,
replace the brake band and clutch drum before use.
•
It is extremely important that the chain brake be checked for proper
operation before each use and that the chain be sharp in order to maintain
the kickback safety level of this saw. Removal of the safety devices.
Inadequate maintenance, or incorrect replacement of the bar or chain may
increase the risk or serious personal injury due to kickback.
8
Содержание CTCHNSAW52A
Страница 1: ......
