Symbols on the Chainsaw
For safe operation and maintenance, symbols are carved in relief on the unit. According to these
identifications, please be careful not to make any mistakes.
a)
Opening to refuel the PETROL MIX
Position: Fuel tank cap.
b)
Opening to refill the CHAIN OIL
Position: Oil cap.
c)
Indicator regarding the switch. Flipping it to O will cause the engine to stop.
Position: Rear-left of the unit.
d)
Indicator regarding the choke. Pull out the choke knob to close.
Position: Rear-right of the unit.
e)
Indicator regarding the chain oil adjuster nut. “Min” decrease oil flow. “Max” increase oil flow.
Position: Bottom of the clutch side.
f)
The position of the H needle, the L needle and the idle adjusting screw.
Position: Rear-left of the unit.
Safety Precautions
Before Use
•
Read this owner's manual carefully to understand how to operate this unit properly.
•
You should never use the product when under the influence of alcohol, when suffering from
exhaustion or lack of sleep, when suffering from drowsiness as a result of having taken cold
medicine, or at any other time when a possibility exists that your judgement might be impaired or
that you might not be able to operate the machine properly and in a safe manner.
•
Avoid running the engine indoors. The exhaust gases contain harmful carbon monoxide.
•
Never use the product under circumstances like those described below:
✗
When the ground is slippery or when other conditions exist which might make it not possible
to maintain a steady posture
✗
At night, at times of heavy fog, or at any other times when your field of vision might be limited
and it would be difficult to gain a clear view of the area.
✗
During rain storms, during lightning storms, at times of strong or gale-force winds, or at any
other times when weather conditions might make it unsafe to use this product.
✗
When using this product for the first time, before beginning actual work, learn to handle it from
skilled worker.
✗
Lack of sleep, tiredness, or physical exhaustion results in lower attention spans, and this in turn
leads to accidents and injury. Limit the amount of time of using the machine continuously to
somewhere around 10 minutes per session, and take 10 ~ 20 minutes of rest between work
sessions. Also try to keep the total amount of work performed in a single day under 2 hours or
less.
✗
Be sure to keep this manual handy so that you may refer to it later whenever any questions
arise.
✗
Always be sure to include this manual when selling, lending or otherwise transferring the
ownership of the product.
✗
Never allow children or anyone unable to fully understand the directions given in this manual to
use this product.
Work Gear and Clothing
•
When using the product, you should wear proper clothing and protective equipment as follows.
1)
Helmet
2) Protection goggles or face Protector
3) Thick work gloves
4) Non-slip-sole work boots
5) Ear protectors
•
You should carry with you.
1)
Attached tools and files.
2) Properly reserved fuel and chain oil.
3) Things to notify/secure your working area (Rope, warning signs..)
4) Whistle (for collaboration or emergency)
5) Hatchet or saw (for removal of obstacles)
•
Never use the product when wearing pants with loose cuffs, when wearing sandals, or when
barefoot.
3
Содержание CTCHNSAW52A
Страница 1: ......
