Certa CT18VIMPWRA, Руководство пользователя

Страница: 9 / 11

Do not continue to press the On/Off switch after the machine has been
automatically switched off.
The battery can be damaged. The battery is
equipped with an NTC temperature control which allows charging only within a
temperature range of between 0°C and 45°C.
A long battery service life is achieved in this manner.
If the battery pack fails to become charged, please check
•
whether there is voltage at the socket-outlet
•
whether there is proper contact at the charging contacts on the charger.
If the battery continues to fail charging, please contact the Kogan customer
support team.
To ensure that the battery pack provides long service you should take care to
recharge it promptly.
You must recharge the battery pack when you notice that the power of the
cordless screwdriver drops.
Never fully discharge the battery pack. This will cause the battery pack to
develop a defect.
Impact Driver Operations
Changing the Tool
Before any work on the power tool (e.g., maintenance, tool change, etc.) as
well as during transport and storage, set the rotational direction switch to the
center position.
Unintentional actuation of the On/Off switch can lead to
injuries.
Inserting the Battery
Use only original this brand Li-ion batteries with the voltage listed on the
nameplate of your power tool.
Using other batteries can lead to injuries and
pose a fire hazard. Set the rotational direction switch to the center position to
protect the power tool against accidental starting. Insert the charged battery
into the handle so that it can be felt to engage and sits flush against the handle.
Reversing the Rotational Direction
The rotational direction switch is used to reverse the rotational direction of the
machine. The impact driver must be turned off before you can use the switch.
•
Right Rotation: For driving in screws and tightening nuts, press the
rotational direction switch through to the left stop.
•
Left Rotation: For loosening and unscrewing screws and nuts, press the
rotational direction switch through to the right stop.
ON/OFF switch
To start the driver, press the On/Off switch and keep it pressed.
To switch off the driver, release the On/Off switch.
8