Certa CT18VIMPWRA Скачать руководство пользователя страница 6

reassembly may result in a risk of electric shock, electrocution or fire.

Do not recharge battery in damp or wet environment. Do not expose 
charger to rain or snow. If battery case is cracked or otherwise damaged,
do not insert into charger.

 Battery short or fire may result.

Charge only same supplier approved rechargeable batteries.

 See 

Functional Description and Specifications. Other types of batteries may 
burst causing personal injury and damage.

Charge battery pack in temperatures above 0ºC and below 45ºC. Store 
tool and battery pack in locations where temperatures will not exceed 
49ºC.

 This is important to prevent serious damage to the battery cells.

Pull by plug rather than cord when disconnecting charger or when 
disconnecting cords using the daisy chain feature.

 This will reduce risk of 

damage to electric plug and cord.

Make sure that cord is located so that it will not be stepped on, tripped 
over, or otherwise subjected to damage or stress.

Do not use an extension cord unless it is absolutely necessary. 

Use of 

improper extension cord could result in risk of fire, electric shock, or 
electrocution.

Do not operate charger with damaged cords or plugs

 — have them 

replaced immediately.

Disconnect the charger from the outlet before attempting any cleaning. 
This will reduce the risk of electric shock.

 Removing the battery pack will 

not reduce this risk. 

Important Safety Instructions for the Battery Pack

Do not incinerate the battery pack even if it is severely damaged or is 
completely worn out.

 The battery pack can explode in a fire. Toxic fumes 

and materials are created when lithium ion battery packs are burned.

Do not charge or use battery in explosive atmospheres, such as in the 
presence of flammable liquids, gases or dust.

 Inserting or removing the 

battery from the charger may ignite the dust or fumes.

If battery contents come into contact with the skin, immediately wash 
area with mild soap and water.

 If battery liquid gets into the eye, rinse 

water over the open eye for 15 minutes or until irritation ceases. If medical 
attention is needed, the battery electrolyte is composed of a mixture of 
liquid organic carbonates and lithium salts.

Contents of opened battery cells may cause respiratory irritation.

 

Provide fresh air. If symptoms persist, seek medical attention.

Charge the battery packs only in the charger which accompanied your 
product.

 

DO NOT splash or immerse in water or other liquids. 

This may cause 

premature cell failure.

Do not store or use the tool and battery pack in locations where the 
temperature may reach or exceed 40°C (such as outside sheds or metal 
buildings in summer).

When batteries are not in tool or charger, keep them away from metal 
objects.

DO NOT put batteries into fire or expose to high heat. 

They may explode.

5

Содержание CT18VIMPWRA












Отзывы: