Certa CT18VIMPWRA Скачать руководство пользователя страница 8

Intended Use

This tool is intended for driving in and loosening screws as well as for drilling 
into wood, metal, ceramic and plastic.
Even when a tool is used as prescribed, it is not possible to eliminate all residual 
risk factors. The following hazards may arise in connection with the tool's 
construction and design:

Damage to lungs if an effective dust mask is not worn.

Damage to hearing if effective hearing protection is not worn.

Health defects resulting from vibration emission of the power tool when 
being used over long periods of time, not being adequately managed or 
properly maintained.

Technical Specifications

Voltage Supply

DC 18V

No Load Speed

0-2400 min

-1

Maximum Torque

180Nm

Forward & Reverse Rotation Yes

Battery Capacity

1300mA

Rating Voltage for Charger

AC 100-240V~/50-60Hz

Charging Time

1 hour

WARNING!

 This machine produces an electromagnetic field during operation. 

This field may under some circumstances interfere with active or passive 
medical implants. To reduce the risk of serious or fatal injury, we recommend 
persons with medical implants to consult their physician and the medical 
implant manufacturer before operating this machine. 

Charging Battery Pack

Note: The battery is supplied partially charged to prevent possible problems. 
Therefore, you should charge it prior to use. Batteries will not reach full charge 
the first time they are charged. Allow several charging/discharging cycles for 
them to fully charge. 

1. Remove the battery pack (5) from the handle, pressing the pushlock 

button (7) downwards to do so.

2. Check that your main voltage is the same as that marked on the rating 

plate of the battery.

3. Plug the mains plug of the charger (6) into the mains socket outlet, then 

turn on the power and the green LED will illuminate.

4. Push the battery pack onto the battery charger. The green LED will 

extinguish and the red LED will illuminate, indicating that the battery pack 
is being charged. 

5. When the charging period is completed after approx 1 hour,the green LED

will illuminate and the red LED will extinguish.

7

Содержание CT18VIMPWRA












Отзывы: