Cersanit AirMATIC, Инструкция по установке и эксплуатации

Страница: 34 / 126

34
INST
ALLA
TION
AND OPERA
TION MANUAL
BA
THTUB WITH MASSAGE SYSTEM
EN
5 SETS EQUIPPED WITH ELECTRONIC CONTROLLERS
5.2 Digital display description.
.
The digital display consists of segments with digits and indicators in the shape of dots. In case a given function is selected,
its indicator shows that it is active until it is deactivated.
The upper indicator shows that the temperature controller is activated.
Display in inactive mode.
Display in active mode.
The display indicates massage time left and the activated .
water heating mode.
5.3 Description of air system functions
In order to activate the air system, the following conditions must be fulfilled:
bathtub is filled with water up to a certain level,
automatic disinfection function is deactivated.
NOTICE!
Unless the bathtub is filled, pressing the air system pushbutton starts bathtub drying process.
1 press activates the water system with pre-programmed parameters.
2 press activates the air system.
1 press activates the first of four available pulsed massage functions.
The pulse frequency may be set within the range of 40% - 100%.
The value set applies to all four pulsed massage functions.
Pulsed system operation is indicated by an active LED
in the area surrounding the pushbutton.
•
•
,, ’’
!