Cerner MDC-2 Скачать руководство пользователя страница 8

MDC-2 

Operator’s Manual

4

WARNINg: If unit is accidentally wet, discontinue use until dry and then test unit for proper 

operation before reuse on a patient.

WARNINg: When attached to other devices, insure that the total chassis leakage currents of 

all units do not exceed 300 µA.

CAUTION: The MDC-2 is to be used on a flat surface only.

CAUTION: The use of Accessory equipment not complying with the equivalent safety require-

ment of this equipment may lead to a reduced level of safety of the resulting system. Consideration 

relating to the choice shall include; 

• Use of the Accessory in the patient vicinity.

• Evidence that the safety certification of the Accessory has been performed in accordance to the 

 

   appropriate IEC 60601-1 and/or IEC 60601-1-1 harmonized national standard.

 

Explosion

DANGER: Explosion hazard! 

Do not use this equipment in the presence of flammable anesthetics 

or other flammable substance in combination with air, oxygen-enriched environment or nitrous oxide.

EMC

This equipment has been certified to be protected to emissions and immunity according to the EMC 

and R&TTE Directives.

WARNINg:  In a domestic environment this product may cause radio interference in which case 

the user may be required to take adequate measures.

Radio Communication

This device complies with part 15 of the FCC Rules.  Operation is subject to the following two condi

-

tions: () This device may not cause harmful interference, and (2) this device must accept any interfer-

ence received, including interference that may cause undesired operation.

It has been tested and found to comply with the limits for a Class A digital device, pursuant to part 

15 of the FCC Rules.  These limits are designed to provide reasonable protection against harmful 

interference when the equipment is operated in a commercial environment.  This equipment gener-

ates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with 

the instruction manual, may cause harmful interference to radio communications.  Operation of this 

equipment in a residential area is likely to cause harmful interference in which case the user will 

Содержание MDC-2




















Отзывы: