Cerner MDC-2, Руководство оператора

Страница: 6 / 19

MDC-2
Operator’s Manual
2
IntroductIon
This manual provides information on the correct use of the Connectivity Engine (MDC-2). It is up
to the user to ensure that any applicable regulations regarding installation and operation of the
MDC-2 are observed, and the proper power line cord is used (if different than the North American
cord supplied).
Manufacturer’s Responsibility
The manufacturer of this equipment is responsible for the effects on safety, reliability, and perfor-
mance of the equipment only if:
• Assembly operations, adjustments, or repairs are carried out by persons authorized
by the manufacturer
• The electrical installation complies with all applicable regulations
• The equipment is used in accordance with the instructions in this manual
Incorrect operation or failure of the user to maintain the MDC-2 in accordance with proper mainte-
nance procedures relieves the manufacturer or his agent from all responsibility for consequent non-
compliance, damage, or injury.
This manual explains how to use the MDC-2 and MDA-. Important safety information is located
throughout the manual where appropriate. READ THE ENTIRE SAFETY INFORMATION SECTION BEFORE
USINg THE MDC-2.
Disposal
Disposal of devices or consumables must be done in accordance with local, state, and federal laws
and regulations.
WEEE Directive 2002/96/EC.- Do not dispose of WEEE products in general waste. At the end of life
of product contact Cerner Corporation for return instructions.