Cermetek CH2124 Скачать руководство пользователя страница 9

Страница: 9 / 18

Cermetek Microelectronics, Inc.

High Speed Internet Modem Family



2005 Cermetek Microelectronics, Inc.

Page 9

Document No. 607-0017 Revision I1 (05/05)

Table 2. Summary of CH2124/60 iModem @T



Result Messages.

Result Message

Explanation of Result Message

BAD MESSAGE NUMBER

1. Occurs during retrieval (

@TGn

command) or during deletion (

@TDKn

command) when message number specified does not exist on POP3
server.

CHAP ERROR

1. Occurs when CHAP protocol error occurs during login. (Not

Supported).

CONNECT

1. Successful dialup and ISP connection.

ERROR

1. Occurs when errors in data field are encountered.

HANGING UP

1. Occurs after PSTN line release.

MAILBOX BUSY

1. Occurs when POP3 server connection is in use by another device

logged in using the same User ID.

2. Occurs when POP3 server connection was not properly terminated and

user attempts to reconnect within 12 minutes of previous connection.

3. Occurs when POP3 server detects error in specified POP3 Login and/or

Password.

MESSAGE ACCEPTED

1. Occurs after successful email transmission and after receipt of

MESSAGE ACCEPT status from ISP SMTP mail server.

MESSAGE DELETED

1. Occurs after successful deletion of specified message number(s).

NO CONNECT

1. Occurs when PSTN line is released after unsuccessful dialup and/or

unsuccessful ISP negotiation and/or unsuccessful SMTP server
negotiation.

NO DIALTONE

1. Occurs after unsuccessful dialup and iModem determines that cause of

unsuccessful dialup is lack of dial tone.

NOT IN IMODEM MODE

1. Occurs when verbose result message responses are disabled. When in

this state,

commands will not be executed.

1. Successful execution of

commands except

@TD

and

@TDM1

PASSWORD ERROR

1. Occurs when error in specified password is detected.

PASSWORD OK

1. Occurs after successful logon to specified ISP account.

POP3 REQUESTS TERMINATION

1. Occurs when the POP3 server determines that the user is already

connected to the POP3 server. POP3 requests that the user terminate
attempted POP3 connection.

RETRIEVAL COMPLETE

1. Occurs after successful retrieval of specified POP3 message number.

SERVER CLOSED

1. Occurs when POP3 server connection is terminated.

BUSY

1. Occurs when called POP is busy.

Содержание CH2124



















Результаты поиска

Содержание CH2124

Отзывы:

Похожие инструкции для CH2124

Бренды по названию

Популярные бренды

Cermetek CH2124, Руководство пользователя

Результаты поиска

Содержание CH2124

Отзывы:

Похожие инструкции для CH2124

Бренды по названию

Популярные бренды