DF Touch
Page 18 of 32
•
Face detection and capture: The clock captures an image of the
user’s face
and saves it in the client
’
s instance so that it can
then optionally be viewed on the timesheet. This option uses a
great deal of data storage.
•
Facial recognition: Employees are enrolled for verification (i.e.,
their image is taken, saved, and distributed to clocks). When
employees punch, the clock attempts to validate that the image
it sees corresponds to the saved image.
The estimated punch rate when using camera validation should be
between 1 and 6 per minute depending on the option selected.
10
INSTALLATION INSTRUCTIONS
The DF Touch Clock has two parts: the clock and the wall-mount. The
Clock is shipped in a cardboard carton together with the wall-mount,
keys for the lock, a 5 ft Ethernet cable, and the external power supply.
If necessary, detach the clock from the wall-mount using the key
supplied. Insert the key into the lock at the bottom of the wall-mount
and turn clock-wise 90 degrees, then lift the clock up and away from the
wall-mount. To install the wall mount, you will need four #8 screws and
(if necessary) the appropriate wall plugs.
10.1
Installing the wall-mount
Install the clock in areas that are well lit and not exposed to very hot,
cold, damp or dusty conditions. Install the wall-mount exactly
horizontally.
Содержание Dayforce Touch Clock
Страница 7: ...DF Touch Page 7 of 32 Ports for model A7 A8...
Страница 31: ...DF Touch Page 31 of 32...