Installation Guide for FibeAir IP-20G, FibeAir IP-20G Assured
Page 8 of 49
Ceragon Proprietary and Confidential
ESD
This equipment contains components which are sensitive to "ESD" (Electro Static
Discharge). Therefore, ESD protection measures must be observed when touching
the IDU.
Anyone responsible for the installation or maintenance of the FibeAir IDU must
use an ESD Wrist Strap.
Additional precautions include personnel grounding, grounding of work bench,
grounding of tools and instruments as well as transport and storage in special
antistatic bags and boxes.
Laser
Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
The optical interface must only be serviced by qualified personnel, who are aware
of the hazards involved to repair laser products.
When handling laser products the following precautions must be taken:
•
Never look directly into an open connector or optical cable.
•
Before disconnecting an optical cable from the optical transmitter, the power
should be switched off. If this is not possible, the cable must be disconnected
from the transmitter before it is disconnected from the receiver.
•
When the cable is reconnected it must be connected to the receiver before it
is connected to the transmitter.
Grounding:
This equipment is designed to permit connection between the
earthed conductor of the DC supply circuit and the earthing conductor at the
equipment.
Note:
This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to part 15 of the FCC
rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is
operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction
manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own
expense.
!!
