Installation Guide for FibeAir IP-20G, FibeAir IP-20G Assured
Page 18 of 49
Ceragon Proprietary and Confidential
2.3
Unpacking Equipment at the Site
The equipment is packed in sealed plastic bags and moisture absorbing bags are
inserted. Any separate sensitive product, i.e. printed boards, are packed in anti-
static handling bags. The equipment is further packed in special designed cases.
Marking is done according to standard practice unless otherwise specified by
customers.
•
Customers address
•
Contract No
•
Site name (if known)
•
Case No
Dimensions and weight of each case are specified in the packing specification
issued for the respective shipment.
Caution!
It is essential that whenever unpacking or disassembling the equipment and
handling printed circuit boards, special precautions should be taken to avoid ESD
(Electrostatic Static Discharge). Generally, units with static discharge protection
should not be unpacked until the installation takes place.
Ensure you are properly grounded at a controlled ESD point before and during
unpacking and handling of any sensitive component.
To avoid malfunctioning or personnel injuries, equipment or
accessories/kits/plug-in unit installation, requires qualified and trained personnel.
Changes or modifications not expressly approved by Ceragon Networks could void
the user's authority to operate the equipment
Where special cables, shields, adapters and grounding kits are supplied or
described in this manual, these items must be used, to comply with the relevant
regulations.
