©2015, 2016 Cequent™ Performance Products, Inc. -
Printed in Mexico
Sheet 8 of 24
24934NP
4-4-16
Rev. C
13. Reuse the 15mm flange nuts on the (6) frame studs to secure the hitch and
the bumper.
14. Tighten the 15mm flange nuts to 38Lb.-Ft. (52N*M
16. Reinstall the bumper cover by following the disassembly steps 1-10 in reverse
order. Replace the removed plastic rivets (step 3) with those supplied in the
hardware kit. Attach using a plastic rivet gun.
15. Measure to find the center of the fascia, mark the area to be trimmed 1 ½”
from the center to left and right of center for a total of 3”, upwards 5” from
the bottom edge of the fascia for a rectangle shape of 3” x 5” located at the
bottom, center edge of the fascia. Carefully trim fascia.
Proper torque is needed to keep the hitch secure to the vehicle
when towing.