CEP AG
Revision 1.2
_________________________________________________________________________________
__________________________________________________________________________________________
Page 16 of 28
Safety and Product Care
Please read the information in this section and the information in “Installation
of the Modem”, before starting your integration work!
4.1 Safety instructions
PLEASE READ THESE SAFETY INSTRUCTIONS AND KEEP A COPY OF THEM.
Always ensure that use of the modem is permitted. The modem may present a
hazard if used in proximity to personal medical electronic devices. As a rule,
the modem must not be used in hospitals, airports or planes.
Never use the modem at a gas station, refuelling point, blasting area or in any
other environment where explosives may be present.
Operating the modem close to other electronic devices, such as antennas,
television sets, and radios may cause electromagnetic interference.
This product is intended to be used with the antenna or other radiating
element at least 20cm away from any part of the human body. In applications
where this rule cannot be applied, the application designer is responsible for
providing the SAR measurement test report and declaration.
You are responsible for observing your country's safety standards, and where
applicable, the relevant wiring rules.
4.2 General precautions
The GT864-QUAD/PY Terminal as a stand alone item is designed for indoor use only.
To use outside it must be integrated into a weatherproof enclosure. Do not exceed
the environmental and electrical limits as specified in “Technical Data”.
Avoid exposing the modem to lighted cigarettes, naked flames or to extreme
hot or cold temperature.
Never try to dismantle the modem yourself. There are no components inside
the modem that can be serviced by the user. If you attempt to dismantle the
modem, you may invalidate the warranty.
The GT864-QUAD/PY Terminal must not be installed or located where the
surface temperature of the plastic case may exceed 85°C.
All cables connected to the GT864-QUAD/PY Terminal must be secured or
clamped, immediately adjacent to the modem's connectors, to provide strain
relief and to avoid transmitting excessive vibration to the modem in the
installation.
Ensure the cables, supplying power, audio headset, and input cable to the
GT864-QUAD/PY Terminal, does not exceed 3 metres.
To protect power supply cables and meet the fire safety requirements when
the unit is powered from a battery or a high current supply, connect a fast
1.25A fuse in line with the positive supply.
Do not connect any incompatible component or product to the GT864-
QUAD/PY Terminal.
