This equipment complies with Part 68 and Part 15 of FCC rules. On the base of this equipment is a label that contains, along with other information,
the FCC Registration Number and the Ringer Equivalence Number (REN) for this equipment. If requested, this information must be given to the
Telephone Company.
The REN is useful to determine the quantity of devices that you may connect to your telephone line and still have those entire devices ring when your
telephone number is called. In most but not all areas, the sum of the REN's of all devices connected to one line should not exceed five (5.0). To be
certain of the number of devices you may connect to your line, as determined by the REN, you should contact your local telephone company to
determine the maximum REN for your calling area.
If your equipment causes harm to the telephone network, the telephone company may discontinue your service temporarily. If possible, they will notify
you in advance. But if advance notice isn't practical, you will be notified as soon as possible. You will be informed of your right to file a complaint with
the FCC. Your telephone company may make changes in its facilities, equipment, operations or procedures that could affect the proper functioning of
your equipment. If they do, you will be informed in advance to give you an opportunity to maintain uninterrupted telephone service.
This equipment may not be used on a coin service line provided by the Telephone Company. Connection to party lines is subject to state tariffs.
1
FCC INFORMATION
1
MP412 Manual_rev.qxd 6/15/05 12:23 PM Page 2
