Century Helicopter Products Swift, Руководство пользователя

Страница: 8 / 40

P.7
CENTURY SWIFT 100% RTF ESC GUIDELINES
The Electron ESC provided with your Swift 100% RTF is a full featured ESC. It is a revolutionary electric speed controller dedicated full
size R/C applications. The Electron is the result of years of research and development. The Electron has multiple, complex, yet easy to
program built-in functions, gentle to the gears and pilots can program the Electron in the field with ease and comfort.
PWM Frequency .........................................12Khz
BEC Continuous Output ............................. None
Continuous / 15-Sec Peak Current
CNE475 ...............................................75A / 90A
Features / Specs:
(If CNE475 utilizes anything beyond 4
cell Li-Po or 14.8V, the power source
may cause serious damage to the ESC
and will not be covered under warranty)
• 6-Pole Brushless Motor up to 80,000rpm
• High Temperature Protection for ESC Body
• Ferrite Ring for Reduced Interference
• 12-Pole Brushless Motor up to 40,000rpm
• Built-in Heat Sink
• Built-in Throttle Calibration Function
• Built-in Soft Start Function for Helicopter
Maximum Operation Voltage / Li-Po Cell
CNE475 ............................................14.V / 4-Cell
Physical hardware limitation 30V
Low Battery Protection
Soft Cut Voltage .................2.9V per Li-Po Cell
Hard Cut Voltage ...............2.6V per Li-Po Cell
High Temperature Protection
Soft Cut Temperature ..........110°C / 230°F
Hard Cut Temperature ........120°C / 248°F
Entering Programming mode:
Although the Swift 100% RTF comes pre-programmed, here is a guideline on how to change programming. Unless you plan on using this
ESC for another application, PLEASE DO NOT CHANGE THE SETTINGS OF YOUR ELECTRON ESC AS IT COMES PRE-PROGRAMMED. The
Electron software is easy to program. You can select 1) Soft start without governor 2) Soft start with Governor 3) Regular Fast start.
NO BRAKE 4) Regular fast start with Brake.
1.) Turn the transmitter on and move the throttle stick to the top position.
2.) Supply power to the Electron by connecting your battery. After roughly 2 seconds, the Electron will emit a series of tones indicating
entry into programming mode.
3.) Move the throttle stick to the lowest position and the Electron will ask which mode you want to use based on the number of beeps.
4.) Select a mode by moving the throttle to the top position.
5.) The Electron will verify that you have activated a mode by the number of beeps pertaining to the mode selected.
6.) Disconnect power source from the electron once the Electron is programmed.
7.) Move throttle stick down and you are ready to fly!
Using Programming mode:
Soft start (heli) w/o governor
MODE 1
1.) Throttle stick
UP
2.) Connect battery (this will be followed by a series of tones indicating “programming mode”).
3.) Move throttle stick DOWN.
4.) Wait for ONE BEEP.
5.) Move throttle stick UP confirming selection.
6.)
Unplug battery
and move throttle stick
DOWN
and
reconnect battery
to fly.
Soft start (heli) with governor
MODE 2
1.) Throttle stick
UP
2.) Connect battery (this will be followed by a series of tones indicating “programming mode”).
3.) Move throttle stick DOWN.
4.) Wait for TWO BEEPS.
5.) Move throttle stick UP confirming selection.
6.)
Unplug battery
and move throttle stick
DOWN
and
reconnect battery
to fly.
Fast start (airplane) No brake
MODE 3
1.) Throttle stick
UP
2.) Connect battery (this will be followed by a series of tones indicating “programming mode”).
3.) Move throttle stick DOWN.
4.) Wait for THREE BEEPS.
5.) Move throttle stick UP confirming selection.
6.)
Unplug battery
and move throttle stick
DOWN
and
reconnect battery
to fly.
Fast start (glider) with brake
MODE 4
1.) Throttle stick
UP
2.) Connect battery (this will be followed by a series of tones indicating “programming mode”).
3.) Move throttle stick DOWN.
4.) Wait for FOUR BEEPS.
5.) Move throttle stick UP confirming selection.
6.)
Unplug battery
and move throttle stick
DOWN
and
reconnect battery
to fly.
• Features Easy to Use: 4 Flying Modes
• Supports Quick Throttle Response
• Supports Linear Throttle Output
• Supports Stable RPM Control
• Supports Compatibility with Most Brushless Motors
• Supports High Speed Brushless Motors
• 2-Pole Brushless Motors up to 240,000rpm
• Built-in Governor Function for Helicopter
• Built-in Auto Motor Timing Function
• Built-in World Famous Brand MOSFET with High
Quality, Reliability & Low Impedance Two Stage
Protection Soft Cut then Hard Cut
• Low Battery Protection for LiPo/LiIon Battery
Your Electron ESC