BINDING
CENTURY SWIFT 100% RTF
P.15
When powering on and you find that you do not have control of the helicopter, it may be possible that you need to bind your transmitter
to the receiver in your heli. To do this, you must follow these steps:
1) Plug the binding jumper into the receiver on the helicopter
2) Connect the Li-Po batter to the ESC on the helicopter.
3) While holding down the bind button, turn on the transmitter.
6) Pull the binding jumper from the receiver.
7) Turn off the transmitter.
8) Your helicopter and trasnmitter should now be bound to
each other. You can now go through the standard steps in
checking that you have control of your helicopter.
4) Watch the RED flashing LED on the Signal Booster on the
right side of your heli. Wait for it to go from a flashing RED to a
solid RED. Once you see solid RED, the helicopter and transmit
-
ter are bound.
Содержание Swift
Страница 38: ...CENTURY SWIFT 100 RTF NOTES P 37 ...
Страница 39: ...CENTURY SWIFT 100 RTF NOTES P 38 ...
Страница 40: ......
