Century Heating CB00025 Скачать руководство пользователя страница 7

Страница: 7 / 62

Page 7

Wood Stove - Owener's Manual -

ENGLISH

1.2 Regulations Covering Stove Installation

When installed and operated as described in these instructions, this wood stove is suitable for

use as a freestanding heater in residential installations.

In Canada, the CSA-B365

Installation Code for Solid Fuel Burning Appliances and Equipment

and the CSA-C22.1

Canadian National Electrical Code

are to be followed in the absence of local

code requirements. In the USA, the ANSI NFPA 211

Standard for Chimneys, Fireplaces, Vents

and Solid Fuel-Burning Appliances

and the ANSI NFPA 70

National Electrical Code

are to be

followed in the absence of local code requirements.

This stove must be connected to a chimney complying with the requirements for Type HT

chimneys in the

Standard for Factory-Built Chimneys for Residential Type and Building Heating

Appliances

, UL 103HT and ULC S629 or to a code-approved masonry chimney with a flue liner.

1.3 Location of the Certification Label

Since the information given on the certification label affixed to the appliance always overrides

the information published, in any other media (owner’s manual, catalogues, flyers, magazines

and web sites) it is important to refer to it in order to have a safe and compliant installation. In

addition, important information about the stove can be found (model, serial number, etc.). The

certification label is located on the back of the stove.

It is recommended to note the stove serial number on page 1 of the

Wood Stove Installation and

Operation Manual

since it will be needed to precisely identify the version of the appliance in the

event replacement parts or technical assistance is required.

Содержание CB00025































































Результаты поиска

Содержание CB00025

Отзывы:

Бренды по названию

Популярные бренды

Century Heating CB00025, Руководство пользователя

Результаты поиска

Содержание CB00025

Отзывы:

Бренды по названию

Популярные бренды