manualshive.com logo in svg

Century Heating CB00025, Руководство пользователя

Поделиться
Скачать
Century Heating CB00025 Скачать руководство пользователя страница 56

Page 28

Installation and Operation Requirements - S250

ENGLISH

7.2 Gasket

The glass gasket is flat, adhesive-backed, woven fibreglass. The 
gasket must be centred on the edge of the glass.

1.  Follow the steps of the previous section to remove the glass. 

2.  Remove the old gasket and clean the glass thoroughly. 

3. 

Peel back a section of the paper covering the adhesive and place 
the gasket on a table with the adhesive side up. 

4. 

Stick the end of the gasket to the middle of one edge, then press the edge of the glass down onto 
the gasket, taking care that it is perfectly centred on the gasket. 

5.  Peel off more of the backing and rotate the glass. The gasket must not be stretched during 

installation. 

6.  Cut the gasket to the required length. 

7.  Pinch the gasket onto the glass in a U shape, all around the glass.

7.3 Door

I n   o r d e r   f o r   t h e   s t o v e   t o   b u r n   a t   i t s   b e s t   e f f i c i e n c y, 

t h e   d o o r   m u s t   p r o v i d e   a   p e r f e c t   s e a l   w i t h   t h e 

f i r e b o x .   T h e   t i g h t n e s s   o f   t h e   d o o r   s e a l   c a n   b e 

v e r i f i e d   b y   c l o s i n g   a n d   l a t c h i n g   t h e   d o o r   o n   a   s t r i p 

o f   p a p e r.   T h e   t e s t   m u s t   b e   p e r f o r m e d   a l l   a r o u n d 

t h e   d o o r.   I f   t h e   p a p e r   s l i p s   o u t   e a s i l y   a n y w h e r e , 

e i t h e r   a d j u s t   t h e   d o o r   o r   r e p l a c e   t h e   g a s k e t . 

7.3.1 Gasket

It is important to replace the gasket with another having the same diameter and density to 

maintain a good seal.

1.  Remove the door and place it face-down on 

something soft like a cushion of rags or a piece 
of carpet.

2.  Remove the old gasket from the door. Use a 

screwdriver to scrape the old gasket adhesive 
from the door gasket groove.

3.  Apply a bead of approximately 3/16" (5 mm) 

of high temperature silicone in the door gasket 
groove. Starting from the middle, hinges side, 
press the gasket into the groove. The gasket 
must not be stretched during installation.

4.  Leave about ½" long of the gasket when cutting 

and press the end into the groove. Tuck any loose 
fibers under the gasket and into the silicone. 

5. 

Close the door. Do not use the stove for 24 hours.

Содержание CB00025































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды