Century 400 Sensei 406-131MO Скачать руководство пользователя страница 5

 

                      SAFETY INSTRUCTIONS

 

SENSEI 86038580  02/08/07 

2-1 

IMPORTANT SAFETY INSTRUCTIONS 

When using an electrical appliance, basic precaution 

must always be followed, including the following: 

READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE. 

This machine is for commercial use. 

 

 

 

 

To reduce the risk of fire, electric shock, or injury: 

Connect to a 

properly grounded outlet

. See Grounding Instructions. 

Do not

 leave the machine unattended. Unplug machine from outlet when not in use and before 

maintenance or service. 

Use only

 indoors. Do not use outdoors or expose to rain. 

Do not

 allow machine to be used as a toy. 

Close attention

 is necessary when used by or near 

children. 

Use only

 as described in this manual. Use only manufacturer’s recommended components and 

attachments. 

Do not

 use damaged electrical cord or plug. Follow all instructions in this manual concerning grounding 

the machine. If the machine is 

not working properly

, has been dropped, damaged, left outdoors, or 

dropped into water, return it to an authorized service center. 

Do not

 pull or carry machine by electrical cord, use as a handle, close a door on cord, or pull cord 

around sharp edges or corners. 

Do not

 run machine over cord. 

Keep

 cord away from heated surfaces. 

Do not

 unplug machine by pulling on cord. To unplug, grasp the electrical plug, not the electrical cord. 

Do not

 handle the electrical plug or machine with wet hands. 

Do not

 operate the machine with any openings blocked. Keep openings free of debris that may reduce 

airflow. 

This machine is intended for cleaning carpet only. 

Do not

 vacuum anything that is burning or smoking, such as cigarettes, matches, or hot ashes. 

This machine is not suitable for picking up health endangering dust. 

Turn off all controls before unplugging.  

Machine can cause a fire

 when operating near flammable vapors or materials. Do not operate this 

machine near flammable fluids, dust or vapors. 

This machine is suitable for commercial use, for example in hotels, schools, hospitals, 
factories, shops and offices for more than normal housekeeping purposes. 

Maintenance and repairs must be done by qualified personnel. 

If foam or liquid comes out of machine, switch off immediately. 

SAVE THESE INSTRUCTIONS 

WARNING: 

Содержание Sensei 406-131MO




























Отзывы: