10/27/2016
EZY-System Manual
Page 16
5. MAINTENANCE
5.1 CLEANING AND INSPECTION
A schedule of routine maintenance will greatly extend the life of your equipment and
ensure that the equipment remains safe to use for both the patient and operator.
CLEANING
The generator and all power and applied part cords may be wiped down with a damp
cloth that has been rinsed in a light detergent solution. The coil may be wiped clean with
a damp cloth that has been rinsed in a light detergent solution.
WARNING:
Do not clean when equipment is energized. Disconnect power cord
from controller unit and from outlet before cleaning. Failure to comply may cause
permanent damage.
INSPECTION
Before each use, the system should be inspected to ensure that all parts are in good
working order. Inspect all cords for damage to the outer insulation. If there is any damage
to the cords or any other parts of the system, have them serviced before using.
CAUTION -
Inspect all cables and applied part daily for any signs of deterioration
or damage. Do not use damaged cables as they may present an electrical shock
hazard. If damage is observed, arrange to have cables serviced by the manufacturer
or authorized service personnel.
5.2 SERVICE INSTRUCTIONS
CAUTION:
To prevent the risk of electrical shock, do not open the controller unit.
There are no user serviceable parts inside. All repairs must be referred to an
authorized qualified technician. Never attempt maintenance operations beyond those
described in the operating instructions. Refer to manufacturer or their authorized
distributor for any additional required service. Opening of the unit by non-qualified
personnel will void the warranty. Always comply with all warnings that appear on
the equipment and in servicing instructions.
Consult the
Troubleshooting
section of this manual to help determine the possible source
of your service problem. If service is required, refer to the
Sales and Service
contact
information located on the controller unit case and at the end of this manual.
