Mounting the origin marker
1.
Close the gate completely.
2.
Mount the origin marker to
the rack a minimum of
500mm from the origin
sensor.
3.
For steel rack mount the
origin marker onto the rack
using the bracket provided.
4.
Weld the bracket to the
rack.
5.
Bolt the origin marker onto
the bracket using the
fasteners provided.
6.
With RAZ rack the origin
marker mounts directly on
top of the rack without a
bracket.
7.
Drill mounting holes
directly into the rack and
bolt into position.
8.
File away the front lip of
the rack if you need to
move the origin marker
closer to the operator as
the gate slides past.
9.
With nylon angle rack it is
necessary to use the
bracket provided.
10. It is preferable to use self
tapping fasteners to secure
the bracket into the side of
the nylon rack as shown.
11. Make a small tack weld to
secure the back of the
bracket onto the angle iron
section of the rack.
12. Bolt the origin marker onto
the bracket using the
fasteners provided.
Steel rack
RAZ rack
Nylon angle rack
